ASME BPVC 2013 Section IV - Rules for Construction of Heating Boilers, Language: English, ISBN: 9780791834688, Print - Book

Detalhes

Prazo de entrega entre 3 a 4 semanas.

O recebimento de encomendas internacionais está sujeito a procedimentos aduaneiros e isto pode causar atrasos além do tempo estimado de entrega.

Product Details

Receba grátis uma Pasta para acondicionar esta seção.

Publisher: ASME

Publish Date: 2013

Pages: 318

Language: English

ISBN: 9780791834688

About the BPVC

Since its first issuance in 1914, ASME’s Boiler and Pressure Vessel Code (BPVC) has pioneered modern standards-development, maintaining a commitment to enhance public safety and technological advancement to meet the needs of a changing world.  More than 100,000 copies of the BPVC are in use in 100 countries around the world. 

Product Scope / Abstract

This Section provides requirements for design, fabrication, installation and inspection of steam heating, hot water heating, hot water supply boilers, and potable water heaters intended for low pressure service that are directly fired by oil, gas, electricity, coal or other solid or liquid fuels.  It contains appendices which cover approval of new material, methods of checking safety valve and safety relief valve capacity, examples of methods of checking safety valve and safety relief valve capacity, examples of methods of calculation and computation, definitions relating to boiler design and welding, and quality control systems.  Rules pertaining to use of the H, HV, and HLW ASME Product Certification Marks are also included.

Careful application of this Section will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes.

Key changes to this 2013 Edition include:

Manufacturer’s Data Report forms are being revised in order to simplify the requirements for the Authorized Inspector to complete the “Certificate of Shop Inspection” and the “Certificate of Field Assembly Inspection” portions of the Manufacturers data report form by requiring only the Inspector’s signature, National Board commission number and endorsement to be recorded. A new paragraph covering tolerances is being added under Part HG, as HG-103, titled “Tolerances”.  This revision was recommended, since forewords are not officially considered part of the Code and any language perceived as mandatory and enforceable needed to be moved to the body of the Code.A new Appendix containing rules for the governing BPVC Edition and Addenda is being added to Section IV as well as revisions needed throughout the Code to clarify the requirements.   It had been suggested that the BPVC be revised to clarify the requirements rather than relying on interpretations.  During work on this item, it became apparent that clarification was needed for establishing the governing BPVC Edition and Addenda for new construction and field assembly as well as for parts.  Also, as a result of initiating this item, CSP-9 was revised to establish a policy for establishing the effective BPVC Edition and Addenda to be used to construct an item that is to be stamped with an ASME Product Certification Mark (e.g. Code Symbol Stamp).All changes to this 2013 Edition are incorporated into the appropriate page and each affected area is identified with a designator.  Each Section includes a Summary of Changes that lists the material affected by the change, plus the nature of the change.  There will no longer be Addenda service for this 2013 Edition or for future Editions.

Intended for manufacturers, users, constructors, designers and others concerned with the design, fabrication, assembly, erection, examination, inspection and testing of pressure vessels, plus all potential governing entities.

BPVC purchasers may wish to purchase a binder from ASME (BPVC Binder), but the publication will also fit a standard three-ring binder.

Power Piping: The Complete Guide to the ASME B31.1 (2013), Charles IV Becht (Author), ISBN-13: 978-0791860144, [Hardcover]

Detalhes

Prazo de entrega entre 3 a 4 semanas.

O recebimento de encomendas internacionais está sujeito a procedimentos aduaneiros e isto pode causar atrasos além do tempo estimado de entrega.

Product Details

Hardcover

Publisher: ASME Press 

Publish Date: 2013

Pages: 260

Language: English

ISBN-10: 0791860140

ISBN-13: 978-0791860144

Description

by Charles Becht IV

This essential new volume provides background information, historical perspective, and expert commentary on the ASME B31.1 Code requirements for power piping design and construction.  It provides the most complete coverage of the Code that is available today and is packed with additional information useful to those responsible for the design and mechanical integrity of power piping.  The author, Dr. Becht, is a long-serving member of ASME piping code committees and is the author of the highly successful book, Process Piping: The Complete Guide to ASME B31.3, also published by ASME Press and now in its third edition.

Dr. Becht explains the principal intentions of the Code, covering the content of each of the Code’s chapters.  Book inserts cover special topics such as spring design, design for vibration, welding processes and bonding processes.  Appendices in the book include useful information for pressure design and flexibility analysis as well as guidelines for computer flexibility analysis and design of piping systems with expansion joints.  From the new designer wanting to know how to size a pipe wall thickness or design a spring to the expert piping engineer wanting to understand some nuance or intent of the Code, everyone whose career involves process piping will find this to be a valuable reference.

ETRTO Standards Manual 2014 - Print Edition - In English with notes in French and German

Detalhes

Produto disponível sob importação. Prazo de entrega entre 3 a 4 semanas.

Author : ETRTO Reference : ETRTO

Publisher : ETRTO - The European Tyre and Rim Technical Organisation

Format : Hardcopy

Language : English

Published Date : 2014

ETRTO : European Tyre and Rim Technical Organisation. ETRTO Standards Maunual 2014 - Print Edition - In English with notes in French and German.

The Standards Manual contains all approved E.T.R.T.O. Standards for tyres/rims/valves for ground vehicles. Published annually in January and will be available end of February.

- General Information

- Passenger Car Tyres

- Commercial Vehicle Tyres

- Agricultural Equipment Tyres

- Cycle and Motorcyle Tyres

- Industrial and Lift Truck Pneumatic Tyres

- Industrial and Lift Truck Solid Tyres

- Earthmoving Equipment Tyres

- Rims - Rim/Valve Combination

- Valves

JATMA Yearbook - Booklet 2014, Japan Automobile Tire Manufactures Association - Print Edition - English

Detalhes

Produto disponível sob importação. Prazo de entrega entre 3 a 4 semanas. Booklet English Version This standard is mainly intended for standardization, simplification and unification of tyres for domestic market, to ensure its compatibility, and contribute to the rationalization of appropriate tyre production and use.

Vade-Mecum de Licitações e Contratos - 6ª Edição - 2013 - Coleção Jacoby de Direito Público - Vol. 8, Editora: Forum, ISBN: 978-85-7700-682-3, Edição Impressa

Detalhes

Legislação selecionada e organizada com jurisprudência, notas e índices

6ª edição revista, atualizada e ampliada

Atualizada com o Decreto nº 7.892/2013Sistema de Registro de Preço - SRP

INFORMAÇÕES TÉCNICAS

I.S.B.N : 978-85-7700-682-3

2.234 páginas

Formato : 17 X 24cm - capa dura

6ª edição revista, atualizada e ampliada - 2013

SINOPSE

Decidir. Esse é o desafio do gestor público: tomar decisões em temas complexos, premido pela urgência do atendimento ao interesse público.

No tema licitações e contratos, conhecer a lei e a doutrina é, muitas vezes, insuficiente à tomada de decisões. Indispensável ter à mão a jurisprudência dos Tribunais de Contas e do Poder Judiciário. Em relação aos primeiros, em face da súmula 222 do TCU, há prevalência  dos entendimentos dessa Corte.

Este trabalho reúne a legislação federal que rege  o tema e mais de 3.500 anotações interpretando a  jurisprudência. Obra de fôlego condenada a ser um  instrumento para permitir ao gestor público decidir e superar os desafios: decidir melhor; decidir com segurança.Contém, além disso, um detalhadíssimo índice remissivo, preciosamente anotado pelo Professor Jacoby.

A Editora Fórum e o Professor Jorge Ulisses Jacoby  Fernandes sentem-¬se compensados por este trabalho e acreditam que os desafios serão, a partir de agora, mais leves!

Esta obra está destinada a ser um novo paradigma no tema licitações e con¬tratos: num país onde a Lei reina e a jurisprudência governa, o Vade-¬Mécum de Licitações e Contratos incorpora¬-se, definitivamente, como instrumento indispensável à tomada de decisões.

SOBRE O AUTOR

Jorge Ulisses Jacoby Fernandes é Advogado, Mestre em Direito Público, Professor de Direito Administrativo, Escritor, Consultor e Conferencista. Além das experiências descritas acima, tem, ainda, as desenvolvidas ao longo de sua carreira no serviço público: Conselheiro do Tribunal de Contas do Distrito Federal, Procurador e Procurador-Geral do Ministério Público junto ao TCDF, Juiz do Trabalho do TRT/10ª Região, Advogado e Administrador Postal da Empresa Brasi leira de Correios e Telégrafos.

Vade Mecum RT - 9ªEd.; 2014; Autores: Equipe RT, Editora: Revista dos Tribunais; ISBN: 978-85-203-5099-7, Edição Impressa

Vade Mecum RT - 9ªEd.

Autores: Equipe RT

Editora: Revista dos Tribunais

ISBN: 978-85-203-5099-7

Páginas: 2176

Peso: 2.141,00 gr

Edição nº 9

Ano de publicação: 2013

Sinopse

Apresentamos a nova edição do Vade Mecum, obra que alia todas as vantagens do livro a todas as vantagens da mais atual tecnologia da informação, numa união perfeita de meios. O livro, em meio físico, continua sendo insubstituível, por suas qualidades de abrangência e generalidade. De outro lado, no meio digital, o leitor obtém a legislação permanentemente atualizada, com a inclusão na base, assim que publicadas, das normas tanto inaugurais como alteradoras. No total, estão à disposição do leitor, além das normas federais em meio físico, mais de 1.200 normas, próprias das principais áreas jurídicas e divididas em legislação superior (Constituição, leis, decretos) e inferior (portarias, resoluções, instruções normativas), e as súmulas do STF, STJ, TSE, TST e dos Juizados Especiais Federais. Do TST, estão incluídas também as Orientações Jurisprudenciais do Pleno, das SDI e da SDC. Ainda, onde necessário, links remetem diretamente a outros dispositivos relacionados ao tema pesquisado. Os dados podem ser acessados em PC e iPad e estarão disponíveis para consulta de 01.02.2014 a 31.12.2014.

ASME’s Boiler and Pressure Vessel Code (BPVC) | 2013 Edition - An International Code American Society of Mechanical Engineers

ASME’s Boiler and Pressure Vessel Code (BPVC) | 2013 Edition - An International Code

American Society of Mechanical Engineers

The International Boiler and Pressure Vessel Code establishes rules of safety — relating only to pressure integrity — governing the design, fabrication, and inspection of boilers and pressure vessels, and nuclear power plant components during construction. The objective of the rules is to provide a margin for deterioration in service. Advancements in design and material and the evidence of experience are constantly being added.

The 2013 Edition of the codes includes a 'no addenda service', meaning that all changes are incorporated into the appropriate page and each affected area is identified, with a designator corresponding to the new Edition. 

Each Section of the 2013 Edition also includes a summary of changes that lists the material affected by the change, plus the nature of the change. 

With the release of the 2013 ASME BPVC, the Code will be moving from a three-year to a two-year cycle.

AS NORMAS DA BSI - BRITISH STANDARDS INSTITUTE NO FORMATO IMPRESSO MAIS VENDIDAS NO MUNDO PODEM SER ADQUIRIDAS NO BRASIL ATRAVÉS DA TECHNOS PUBLICAÇÕES

AS NORMAS DA BSI - BRITISH STANDARDS INSTITUTE NO FORMATO IMPRESSO MAIS VENDIDAS NO MUNDO PODEM SER ADQUIRIDAS NO BRASIL ATRAVÉS DA TECHNOS PUBLICAÇÕES

Somos um distribuidor autorizado das Normas BSI para o Brasil.

Solicite-nos um orçamento para qualquer norma BSI pelo e-mail vendas@technospub.com.br 

Para compra de qualquer Norma BSI acima de 10 unidades (da mesma norma) forneçemos um desconto especial.

Todos os preços indicados já incluem os custos de frete.

1.  BS 5839-6 : 2013 Fire detection and fire alarm systems for buildings. Code of practice for the design, installation, commissioning and maintenance of fire detection and fire alarm systems in domestic premises   Publication Date: 31 May 2013 ISBN: 9780580783333   List Price: R$ 1.065,00

2.  BS 10008 : 2008 Evidential weight and legal admissibility of electronic information. Specification Publication Date: 30 November 2008 ISBN: 9780580651199 List Price: R$ 705,00

3. BS 10012 : 2009 Data protection. Specification for a personal information management system Publication Date: 31 May 2009 ISBN: 97805801550 4 List Price: R$570,00

4. BS 31100 : 2011 Risk management. Code of practice and guidance for the implementation of BS ISO 31000 Publication Date: 30 June 2011 ISBN: 9780580716072 List Price: R$615,00

5. BS 8300 : 2009 + A1 : 2010 Design of buildings and their approaches to meet the needs of disabled people. Code of practice Publication Date: 28 February 2009 ISBN: 9780580707308 List Price: R$1.200,00

6. BS EN 14730 - 1 : 2006 + A1 : 2010 Railway applications. Track. Aluminothermicwelding of rails. Approval of welding processes Publication Date: 31 August 2006 ISBN: 9780580638923 List Price: R$1.040,00

8. BS EN ISO 13485 : 2012 Medical devices. Quality management systems. Requirements for regulatory purposes Publication Date: 31 March 2012 ISBN: 9780580799532 List Price: R$1.100,00

9. BS EN ISO 14119 : 2013 Safety of machinery. Interlocking devices associated with guards. Principles for design and selection   Publication Date: 31 October 2013 ISBN : 9780580677458 List Price: R$1.065,00`

10. BS PD 5500:2012+A2:2013 Specification for unfired fusion welded pressure vessels   Publication Date: 30 September 2012 ISBN: 9780580849756 List Price: R$ 8.280,00

11. BS PD 6689 : 2009 Surface treatments. Guidance on the use of BS EN 12271 and BS EN 12273 Publication Date: 31 May 2009 ISBN: 9780580656361 List Price: R$ 830,00

12. BS EN ISO 18265 : 2013 Metallic materials. Conversion of hardness values Publication Date: 31 October 2013 ISBN: 9780580691959 List Price: R$1.065,00

13. BS ISO/IEC 27005 : 2011 Information technology. Security techniques. Information security risk management Publication Date: 30 June 2011 ISBN: 9780580717147 List Price: R$615,00

14. BS ISO/IEC 27031:2011 Information technology. Security techniques. Guidelines for information and communication technology readiness for business continuity Publication Date: 31 March 2011 ISBN: 9780580594267 List Price: R$ 525,00

15. BS ISO 22301:2012 Societal security. Business continuity management systems. Requirements Publication Date: 31 May 2012 ISBN: 9780580686801 List Price: R$570,00

16. BS ISO 31000 : 2009 Risk management. Principles and guidelines Publication Date: 31 March 2010 ISBN: 9780580675713 List Price: R$570,00

17. BS EN ISO 14971 : 2012 Medical devices. Application of risk management to medical devices   Publication Date: 31 July 2012 ISBN: 9780580799525 List Price: R$1.165,00

18. BS 8888 : 2013 Technical product documentation and specification  Publication Date: 31 December 2013 ISBN: 9780580814457 List Price: R$1.210,00

19. BS 5266-1:2011 - Emergency lighting. Code of practice for the emergency escape lighting of premises (BS 5266-1:2011)  Publication Date: 30 November 2011 ISBN: 9780580790942 List Price: R$1.040,00

20. BS 7671 : 2008 + A1 : 2011 + A2 : 2013 - Requirements for electrical installations. IET Wiring Regulations. Seventeenth Edition Publication Date: ISBN: 9781849192699 List Price: R$ 525,00

21. BS PAS 200:2011 - Crisis management. Guidance and good practice Publication Date: 21 September 2011 ISBN: 9780580764783 List Price: R$620.00

22. BS EN ISO 13385-1:2011 - Geometrical product specifications (GPS). Dimensional measuring equipment. Callipers. Design and metrological characteristics  Publication Date: 31 August 2011 ISBN: 9780580590689 List Price: R$780,00

23. BS EN 287-1:2011 - Qualification test of welders. Fusion welding. Steels *** Status : Current, Superseded Published : July 2011 Replaced By : BS EN ISO 9606-1:2013 ***  List Price: Status : Current, Superseded Published : July 2011 Replaced By : BS EN ISO 9606-1:2013 ISBN: 9780580730429 Publication Status: *** Current, Superseded Published : July 2011 Replaced By : BS EN ISO 9606-1:2013 ***

24. BS OHSAS 18001:2007 - Occupational health and safety management systems. Requirements  Publication Date: 31 July 2007 ISBN: 9780580509339 List Price: R$620,00

25. BS OHSAS 18002 : 2008 Occupational health and safety management systems. Guidelines for the implementation of OHSAS 18001:2007  Publication Date: 30 November 2008 ISBN: 9780580626869 List Price: R$620,00

26. BS EN 55022:2010 - Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement  Publication Date: 31 July 2011 ISBN: 9780580770920 List Price: R$1.100,00

26. BS PAS 223 : 2011 - Prerequisite programmes and design requirements for food safety in the manufacture and provision of food packaging  Publication Date: 01 July 2011 ISBN: 9780580741708 List Price: R$530,00

27. BS EN 71-1 : 2011 + A2 : 2013 Safety of toys. Mechanical and physical properties  Publication Date: 30 June 2011 ISBN: 9780580780264 List Price: R$1.310,00

28 BS PAS 125 : 2011 Automotive services - Automotive services. Specification for vehicle damage repair processes  Publication Date: 21 June 2011 ISBN: 9780580726576 List Price: R$495,00

29. BS EN ISO 50001:2011 - Energy management systems. Requirements with guidance for use  Publication Date: 15 June 2011 ISBN: 9780580762062 List Price: R$1.180,00

30. BS ISO/IEC 20000-1:2011 - Information technology. Service management. Service management system requirements  Publication Date: 31 May 2011 ISBN: 9780580636073 List Price: R$570,00

31. BS EN ISO 3611 : 2010 - Geometrical product specifications (GPS). Dimensional measuring equipment. Micrometers for external measurements. Design and metrological characteristics  Publication Date: 30 April 2011 ISBN: 9780580626173 List Price: R$780,00

32. BS 6180 : 2011 - Barriers in and about buildings. Code of practice  Publication Date: 31 March 2011 ISBN: 9780580697395 List Price: R$1.040,00

33. BS 10175 : 2011 + A1 : 2013 Investigation of potentially contaminated sites. Code of practice Publication Date: 31 March 2011 ISBN: 9780580828140 List Price: R$1.310,00

34. BS EN ISO 17637:2011 - Non-destructive testing of welds. Visual testing of fusion-welded joints  Publication Date: 31 March 2011 ISBN: 9780580721045 List Price: R$590,00

35. BS 3998:2010 - Tree work. Recommendations  Publication Date: 31 December 2010 ISBN: 9780580537776 List Price: R$985,00

36. BS 8580 : 2010 - Water quality. Risk assessments for Legionella control. Code of practice  Publication Date: 31 December 2010 ISBN: 9780580671135 List Price: R$985,00

37. BS 11000-1 : 2010 - Collaborative business relationships. A framework specification   Publication Date: 31 October 2010 ISBN: 9780580695629 List Price: R$985,00

38 BIP 2200 PP 1990 (Single Copy) - Structural Eurocodes: Extracts from the Structural Eurocodes for Students of Structural Design (PP 1990)   Publication Date: 03 August 2010 ISBN: 9780580694547 List Price: R$310,00

39. BS EN ISO 12100:2010 - Safety of machinery. General principles for design. Risk assessment and risk reduction  Publication Date: 31 December 2010 ISBN: 9780580742620 List Price: R$1.100,00

40. BS EN ISO 9004 : 2009 - Managing for the sustained success of an organization. A quality management approach  Publication Date: 03 November 2009 ISBN: 9780580555237 List Price: R$1.040,00

41. BS EN ISO 13849-1 : 2008 - Safety of machinery. Safety-related parts of control systems. General principles for design Publication Date: 30 June 2009 ISBN: 9780580724695 List Price: R$1.100,00

42. BS EN 1090-2 : 2008 + A1 : 2011 - Execution of steel structures andaluminium structures. Technical requirements for steel structures  Publication Date: 31 December 2008 ISBN: 9780580738715 List Price: R$1.490,00

43. BS EN ISO 9001 : 2008 - Quality management systems. Requirements   Publication Date: 30 November 2008 ISBN: 9780580687389 List Price: R$570,00

44. BS 9999 : 2008 - Code of practice for fire safety in the design, management and use of buildings   Publication Date: 31 October 2008 ISBN: 9780580579202 List Price: R$1.605,00

45. NA to BS EN 1991-1-4 : 2005 + A1 : 2010 UK National Annex to Eurocode 1. Actions on structures. General actions  Publication Date: 30 September 2008 ISBN: 9780580738180 List Price: R$985,00

46. BS PAS 55-2:2008 Asset management. Guidelines for the application of PAS 55-1  Publication Date: 15 September 2008 ISBN: 9780580509766 List Price: R$710,00

47. BS PAS 55-1:2008 - Asset management. Specification for the optimized management of physical assets   Publication Date: 15 September 2008 ISBN: 9780580509759 List Price: R$620,00

48. BS 25999-2 : 2007 - Business continuity management. Specification ***Replaced By : BS EN 60947-1 ***  Publication Date: *** Superseded, Withdrawn Published : November 2007 Replaced By : BS ISO 22301:2012*** ISBN: 9780580599132 List Price: *** Superseded, Withdrawn Published : November 2007 Replaced By : BS ISO 22301:2012 ***

49. BS EN 60947-1 : 2007 + A1 : 2011 - Low-voltage switchgear andcontrolgear. General rules  Publication Date: 31 August 2007 ISBN: 9780580851759 List Price: R$1.545,00

50. BIP 0017:2006 - Universal Decimal Classification (UDC). Complete edition. Volumes 1 & 2  Publication Date: 01 August 2006 ISBN: 9990580454827 List Price: R$1.410,00

51. BS EN 60204-1 : 2006 + A1 : 2009 - Safety of machinery. Electrical equipment of machines. General requirements  Publication Date: 30 June 2006 ISBN: 9780580709753 List Price: R$1.255,00

52. BS EN 60950-1 : 2006 + A2 : 2013 Information technology equipment. Safety. General requirements  Publication Date: 31 May 2006 ISBN: 9780580740503 List Price: R$1.670,00

53. BS ISO/IEC 27001:2013 - Information technology. Security techniques. Information security management systems.   Publication Date: 01 October 2013 ISBN: 9780580650994 List Price: R$570,00

54. BS EN ISO 22000:2005 - Food safety management systems. Requirements for any organization in the food chain  Publication Date: 16 September 2005 ISBN: 0580466841 List Price: R$985,00

55. BS EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories  Publication Date: 29 June 2005 ISBN: 9990580463303 List Price: R$880,00

56. BS ISO/IEC 27002:2013 Information technology. Security techniques. Code of practice for information security controls  Publication Date: 01 October 2013 ISBN: 9780580639210 List Price: R$570

57. BS EN 1991-1-4 : 2005 + Amendment1:2010 Eurocode 1. Actions on structures. General actions. Wind actions Publication Date: 25 April 2005 ISBN: 9780580684975 List Price: R$1.355,00

58. BS EN ISO 14001 : 2004 Environmental management systems. Requirements with guidance for use  Publication Date: 16 November 2004 ISBN: 9780580688423 List Price: R$875,00

59. BS EN ISO 19011:2011 Guidelines for auditing management systems,Format Hardcopy Publication Date: 30 November 2011 ISBN: 9780580775246 List Price: R$1.040,00

60. BS 5839-1:2013 Fire detection and fire alarm systems for buildings - Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises Publication Date: 31 March 2013 ISBN: 9780580783326 List Price: R$1.310,00

61. BS 6001-1:1999+A1:2011, ISO 2859-1:1999 Sampling procedures for inspection by attributesSampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection  Publication Date: 15 December 1999 ISBN: 9780580712760 List Price: R$1,100,00